For siliconeのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

For silicone - メーカー・企業と業務用製品 | イプロスものづくり

For siliconeの製品一覧

1~3 件を表示 / 全 3 件

表示件数

Low viscosity, high strength type silicone 'IS-CRN40'

Since a promoter is added to the hardener (catalyst) side, there is less thickening of the main agent due to storage, resulting in longer durability!

The "IS-CRN40" is a silicone rubber for molding that, despite being a high-hardness type, possesses low viscosity comparable to that of general-purpose types, making it highly effective for mixing, stirring, degassing, and pouring operations. The strength after curing is approximately nine times that of standard molding types (tensile strength). The number of releases is several times greater compared to typical molding silicones (according to our company), allowing for a smaller mold area even for larger quantities. 【Features】 - Low viscosity before curing (13-15 Pa·s) - Easy mixing, stirring, and pouring - Low viscosity similar to domestically produced general condensation types - Tear strength (resistance to tearing) is about nine times stronger - The curing agent is colored green, preventing visual mixing failures *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Low viscosity, high strength type silicone 'IS-CRN25'

The main agent is a beautiful white color! The hardener is red, which allows for visual confirmation to prevent mixing errors.

"IS-CRN25" is a highly flexible silicone rubber with a rubber strength of 25 degrees and an elongation rate of approximately 500%. Additionally, compared to typical low-hardness, high-strength silicone, its viscosity before curing is about 2/3, improving workability. It can be used for complex mold making that has previously been difficult to demold, including figures, crafts, artificial rocks, and artificial wood. 【Features】 ■ Rubber strength type 25-28 degrees ■ An elongation rate of 500%, making it suitable for mold making of artificial rocks and wood ■ The curing agent is colored red to visually prevent mixing errors *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Translucent, low viscosity, high strength silicone 'CRT-40'

The strength after hardening is about 7 times stronger (tensile strength) than that of the general type!

The "CRT-40" is a translucent, condensation-type, high-strength silicone that has a low viscosity level comparable to general-purpose types, making it highly effective for mixing, stirring, degassing, and pouring tasks in mold-making silicone rubber. Additionally, because the silicone is translucent, air bubbles can be easily visually confirmed. During the demolding of the original model or when producing replicas, the visibility inside the silicone mold is improved, leading to higher work efficiency. 【Properties after curing】 ■ Rubber hardness (Shore A): 40 ■ Tensile strength (Mpa): 4.0 ■ Tear strength (N/mm): 25 ■ Elongation (%): 450 *For more details, please refer to the PDF document or feel free to contact us.

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録